How to switch to a heat pump: what families need to know
A heat pump heats and cools a family home with less energy than a furnace. Here is how to tell if one fits your house, your climate, and your timing.
The furnace is making a noise it did not make last year. Or the quote to fix the air conditioner came back high. Either way, a decision is coming.
Heating is the biggest energy user in most family homes, and the furnace or boiler is where most of that carbon comes from. A heat pump heats with electricity, and it moves heat instead of making it. That means it uses less energy for the same warmth. In summer it runs the other way and cools the house.
This article covers how a heat pump works in plain terms, what to check about your house, how to find an installer, and how to live with one once it is in.
Know what a heat pump does
A heat pump uses the same parts as a fridge or an air conditioner: a compressor, a fan, and a loop of refrigerant. In winter, it pulls heat from the outdoor air (even cold air holds some) and moves it inside. In summer, it pulls heat from inside and moves it out. One machine replaces both the furnace and the air conditioner.
There are a few types:
- An air-source heat pump is the most common. An outdoor unit connects to indoor units or to your existing ducts.
- A ductless (mini-split) system has one or more wall units, each heating a room or zone. It suits homes without ducts.
- A ducted system connects to your existing ducts and replaces a central furnace.
- A ground-source (geothermal) system uses pipes buried in the yard. It costs more to install and needs space, so it suits fewer families.
Cold-climate models are built to keep working at low outdoor temperatures. If your winters are cold, ask for one by name.
Check your house first
A heat pump works best in a home that holds heat. Before you buy one, look at the building.
- Seal drafts around windows, doors, and the attic hatch.
- Add attic insulation if yours is thin.
- Fix any ducts that leak into the attic or crawl space.
A tighter house lets you buy a smaller heat pump, and a smaller unit costs less and runs better. Many of the same steps work in a rental, and all of them cut winter heating carbon whatever you heat with.
Check your electrical panel too. Some older homes need a panel upgrade to add a heat pump. An installer or electrician can tell you. If you are also thinking about an induction stove or solar panels, ask them to plan for all of it at once.
Decide whether to keep a backup
In mild climates, a heat pump handles the whole winter on its own. In colder places, some families keep the old furnace as a backup for the coldest nights. This is called a dual-fuel or hybrid setup. The heat pump does most of the work, and the furnace runs only when it is too cold outside for the heat pump to keep up.
Others go all-electric and add a small electric backup inside the unit. Ask your installer what works in your climate. The right answer depends on how cold it gets and how well your house holds heat.
Get more than one quote
Heat pump installs vary a lot. Get at least two or three quotes, and compare what each one includes.
A good installer:
- Measures your home and calculates the heat load instead of guessing from square footage.
- Explains the size they chose and why. Bigger is not better. An oversized unit cycles on and off and wears out faster.
- Lists the model, the cold-weather rating, and the warranty in writing.
- Talks about your ducts or where the wall units go, and how the air will move through the house.
Ask about rebates. Many utilities and governments offer money toward a heat pump. The installer often knows the current programs, and the paperwork sometimes goes through them. Check your utility’s website too.
Plan the timing
Do not wait for the furnace to die in January. A failed furnace means a rushed decision and whatever unit is in stock. Start pricing a heat pump while the old system still runs. Spring and fall are quieter seasons for installers.
If the furnace is young and working, keep it for now. Making a new appliance has its own carbon cost. Spend the money on insulation and sealing first, then switch when the old system nears the end of its life. Your energy bill shows how much heating costs you each year, which helps you weigh the timing.
Live with it differently
A heat pump runs differently than a furnace, and a few habits help.
- Set it and leave it. A heat pump works best holding a steady temperature. Big setbacks overnight make it work hard in the morning. A small setback of a degree or two is fine.
- Expect gentler air. The air from a heat pump feels cooler than furnace air, because it runs longer at a lower temperature. The room still reaches the set point.
- Keep the outdoor unit clear. Brush off snow and leaves, and keep kids’ toys and bikes away from it.
- Change or clean the filters as the manual says. A dirty filter makes the unit work harder.
- In summer, shade the windows and cool the house before you lower the set point, the same as with any air conditioner.
Follow the maker’s instructions for maintenance, and book a service check as the manual suggests.
Talk to the kids about it
A heat pump is a good chance to show kids how the house works. Walk them out to the outdoor unit and let them feel the air it blows. Explain that it is moving heat from outside to inside. Then set a house rule: nobody piles snow, leaves, or toys against it. Kids who understand the machine are more likely to leave it alone.
The first step
Pull up your last winter of heating bills and find out what fuel you burn and how much. Then seal the worst drafts you can find this weekend. Both steps make the heat pump decision easier when the time comes, and both cut carbon now whether or not you ever switch.
Keep reading
Related guides
- Home
How to cool your family home in summer with less carbon
Air conditioning is the biggest summer energy user in most homes. These changes keep kids cool and lower the carbon, from shade and fans to the thermostat.
- Home
How to decide if an induction stove is right for your family
Induction stoves cook fast, run on electricity, and keep gas out of your kitchen air. Here is how to tell if one fits your family, your pans, and your home.
- Home
How to decide if solar panels make sense for your family home
Solar panels can cut the carbon from your home's power. Here is how to tell if your roof, budget, and plans fit before you talk to an installer.