Carbon Moms

Articles › Home

How to choose a lower-carbon washer and dryer for a big family

A big family runs the washer and dryer almost every day. Here is how to pick a pair that uses less energy and water and lasts for years.

By Mary Jane HowiePublished 2026-11-156 min read


A big family can run the washer and dryer every single day. Sports gear, school clothes, sheets, towels, and baby things all pass through the same two machines. That makes the laundry pair one of the hardest working appliances in the house.

When it is time to buy, the choice you make will shape your energy use for many years. Here is how to pick a washer and dryer that use less energy and water, fit your family, and keep running.

First, decide if you need new machines at all

Making a new appliance has its own carbon cost. A working washer that is a few years old is usually worth keeping. A repair is often the lower-carbon choice.

Look for a repair first if:

  • The machine makes a new noise or leaks.
  • The drum will not spin or drain.
  • The dryer runs but does not heat.
  • A door latch, belt, or pump has failed.

Many of these are common fixes. Finding a repair before you replace it walks through how to find a good repair person and when a fix is worth it.

Replace a machine when the repair is close to the cost of a new one, when parts are no longer made, or when the machine is a safety risk. A dryer that smells like burning or a washer with a cracked tub should go.

Pick the right size, not the biggest size

A large drum lets you wash more clothes at once. For a big family, that means fewer loads each week. Fewer loads use less water, less energy, and less of your time.

But bigger is not always better. A huge drum that runs half full wastes water and energy. Think about how your family does laundry now.

  • If you run several full loads a day, a large capacity washer makes sense.
  • If you wash in small batches for each child, a medium drum may fit better.
  • Check that bulky items like comforters and sleeping bags fit, so you do not need a trip to the laundromat.

Match the dryer to the washer. A dryer drum should hold a full washer load without packing it tight. Clothes need room to tumble so they dry faster.

Choose a high-efficiency washer

Most of the energy in a wash cycle goes to heating water. A high-efficiency washer uses less water, so it has less water to heat. It also spins faster, which pulls more water out of the clothes before they reach the dryer.

Front-loading washers usually use less water than top-loaders. They also tend to spin faster. Some families find them harder on the back. A pedestal can raise the drum to a better height.

High-efficiency top-loaders are another option. They skip the tall center post and use less water than older top-loaders. They suit families who like to load from above.

Look for these features:

  • A high spin speed setting.
  • A good cold wash cycle, since most loads can run cold.
  • A quick cycle for lightly worn clothes.
  • A delay start, so you can run loads at night if your power costs less then.

In the United States, look for the ENERGY STAR label. It marks models that use less energy and water than standard ones. Cutting hot water in the laundry also ties into cutting hot water use across the whole house.

Choose a dryer that uses less energy

The dryer is often the biggest energy user in the laundry room. Here are the main types.

  • Heat pump dryers use the least energy. They reuse warm air instead of blowing it outside. They need no outside vent, so they can go in a closet or apartment. Cycles take longer, and they cost more up front.
  • Standard electric dryers heat air with a coil and vent it outside. They are common and simple.
  • Gas dryers burn natural gas to heat the air. They dry fast but burn fossil fuel inside your home.

If your home is moving away from gas, a heat pump dryer is a strong choice. It runs on electricity, which can come from cleaner sources over time.

Whatever type you choose, get a moisture sensor. It stops the dryer when clothes are dry instead of running a set time. That saves energy on every load and is gentler on fabric.

Check your space and wiring before you buy

Laundry machines need the right hookups. Measure first, and check what your laundry area has.

  • Electric dryers usually need a large dedicated circuit. A heat pump dryer may need the same or may plug into a standard outlet. Read the manual before you buy.
  • Switching from gas to electric often means adding a new circuit. Have a licensed electrician check your panel and do the work. Never add a large circuit yourself.
  • Gas dryers need a gas line and a vent. Only a licensed professional should connect or disconnect a gas line.
  • Vents for standard dryers should be short, with smooth metal duct. Avoid long runs and thin foil or plastic duct.

Measure the door frames and hallway too. A large washer that will not fit through the laundry room door is a hard lesson.

Look for machines you can repair

The longer a machine lasts, the lower its carbon cost for each year of use. Choosing products that can be repaired explains what to look for. Before you buy, ask a few questions.

  • Does the maker sell parts to owners and repair shops?
  • Is there a local repair person who works on this brand?
  • How long is the warranty, and what does it cover?
  • Are simple parts, like filters and belts, easy to reach?

Simple controls are often easier to fix than complex screens. Fancy app features add little to the job of washing clothes.

Think about buying used or open box

Used and open box machines can be a good deal and skip new manufacturing. Ask to see the machine run. Check for rust, leaks, and smells. Ask how old it is and why it is being sold. Some appliance stores sell refurbished machines with a short warranty.

Skip used gas dryers unless a licensed pro will check and install them.

Install and care for them well

A good machine lasts longer with simple care.

  1. Level the washer so it does not shake and wear out.
  2. Use braided hoses and check them each year for bulges or cracks.
  3. Clean the lint filter before every dryer load.
  4. Clean the dryer vent duct at least once a year, or hire someone to do it. Lint build-up in the vent is a fire risk.
  5. Leave the washer door open after a cycle so it can dry out.
  6. Do not run the dryer when no one is home or when everyone is asleep.

Ask the store to haul away your old machines and recycle them. Many will, and it keeps the metal out of the landfill.

Keep the habits that matter most

New machines help, but habits still do the heavy lifting. Wash cold, run full loads, and hang what you can. Cutting the carbon from family laundry covers those habits in more detail. Then compare your bills over a few months to see what changed.

Mary Jane Howie

Civil engineer, mom of four, and the writer behind Carbon Moms. She writes about the changes at home that lower a family's carbon without adding work to the week. More about her.