Carbon Moms

Articles › Home

How to cut the carbon from family laundry

Family laundry never stops. These five changes cut the energy behind every load, from water temperature to the dryer, without adding work to your week.

By Mary Jane HowiePublished 2026-10-135 min read


A family makes a lot of laundry. Spit-up, soccer socks, muddy knees, wet towels. The loads come every day.

Most of the carbon in laundry comes from energy, not from soap or fabric. Two steps use the most: heating the water in the washer and running the dryer. Change those two and the rest matters less.

Here are five changes, in the order that tends to matter most.

Dry less in the machine

The dryer is usually the biggest energy user in the laundry room. Skipping it for even some loads makes a difference.

Hang shirts, pajamas, and kids’ play clothes on a rack or a line. Clothes for small children are small, so they dry fast. A folding rack in a spare room or near a window handles a normal load. Open a window or run a fan if the air feels damp. Wet clothes drying in a closed room can add moisture to the home.

Keep the dryer for the things that dry slowly. Towels, jeans, and bedding are the usual ones. Some families line dry in warm months and use the dryer in winter. That is still a cut.

When the dryer does run, a few habits shorten the cycle:

  • Clean the lint filter before every load. A clogged filter slows drying.
  • Use the moisture sensor setting if your dryer has one. It stops the cycle when clothes are dry instead of when a timer ends.
  • Dry heavy items and light items in separate loads. Light clothes get over-dried while towels catch up.
  • Set the washer to a high spin speed if the fabric allows it. Less water in the clothes means less drying time.

Wash in cold water

Heating water takes most of the energy in a washing machine cycle. Cold water skips that step.

Modern detergents are made to work in cold water. Check that the label says so. Cold water handles everyday kid laundry well, including most food spills and grass stains when you treat them first.

Some jobs still call for warm or hot water. Bedding after a stomach bug is one. Cloth diapers are another, and the diaper maker’s care instructions come first. Always read the care label on the clothes. Use hot water for those loads and cold for the rest.

Heating water is the biggest part of the laundry bill and of the bathroom bill too. The same thinking runs through the rest of your hot water use.

Wash fewer times

The cleanest load is the one you skip. Kids can wear a sweater, a hoodie, or a pair of jeans more than once if it has no stains or smell. Pajamas can often go a second night. Towels can dry on a hook between uses.

Sort clothes into a clean pile and a dirty pile at the end of the day. A hamper full of barely worn clothes is a common reason for extra loads. A short rule helps older kids: smell it, look at it, then decide.

Run full loads when you do wash. Do not pack the drum so tight that clothes cannot move, because they will not rinse well. A drum that is full but loose works best. Many machines list a load size in the manual.

Clothes that are washed less often also last longer, which matters when the same pieces will go to the next child. Your own clothes get the same benefit, and a few care habits stretch them further.

Treat stains fast

A stain that sits sets. Then it needs a second wash, often a hotter one, and sometimes it never comes out.

Keep a small stain station near the hamper. Cold water, a bar of laundry soap or a stain spray, and an old toothbrush are enough. Rinse the stain from the back of the fabric so the water pushes it out instead of in. Let it sit for a bit, then wash as usual. For milk, formula, and food stains, rinse with cold water first. Hot water can set protein stains.

One treated stain saves one repeat load.

Choose detergent and extras with less waste

The washer cycle has the largest effect, but the products add up.

Use the amount of detergent the label gives for your load size. More soap does not clean better. It can leave residue in clothes and in the machine. A concentrated detergent or a dry sheet or powder in a cardboard box cuts the weight and plastic in packaging. Pick the form your family will use up.

Skip fabric softener and dryer sheets if you can. They add cost and packaging. Softener can also leave a coating that makes towels less absorbent.

The same rules apply to the rest of the cleaning cupboard. Cleaning with less carbon and less plastic covers the sprays, wipes, and sponges.

When the washer or dryer needs replacing

Do not replace a working machine just to save energy. Making a new appliance has its own carbon cost. Repair it first if a part fails and the machine is otherwise sound.

When replacement is the only option, look at energy ratings. In the United States, look for the ENERGY STAR label. For dryers, a heat pump dryer uses less energy than a standard vented dryer. It costs more to buy, so compare the price against your usage before you decide. A front-loading washer usually uses less water than an older top-loader, which means less water to heat.

A machine that can be fixed is worth more than one that cannot. Choosing a washer and dryer for a big family explains what to look for before you buy, and your energy bill will show whether the change made a difference.

Start with one change

Pick the change that fits your week. For many families it is the drying rack. For others it is turning the dial to cold. Do one for a month, then add another.

Mary Jane Howie

Civil engineer, mom of four, and the writer behind Carbon Moms. She writes about the changes at home that lower a family's carbon without adding work to the week. More about her.